Whirlpool 30" - 19.7 Cu. Ft. French Door Refrigerator

We bought this fridge less than 3 years ago, and recently, the plastic liner part under the right door has cracked. There was no trauma to that part, so it's baffling that it cracked. We've had this thing for such a short period of time. I'm trying to look online for a replacement part and can't even find the correct part to fix it. Such a piece junk. Not worth getting.

This refrigerator was sold with our house we bought in 2016. It was manufactured in 2015. After a couple years of use we noticed the right top door would "pop" and eventually started dropping when we opened it. After a few months of this, it required us to manually lift the door in order to close it. Looking at the bottom hinge point of the door, there was plastic on the corner where the cam sets in. This was cracked and broken off, which is what was causing the door to drop upon opening. After having a home warranty technician out, we found out the whole door assembly would need to be replaced. I purchased a door in November of 2018 and installed it. Everything was working great up until June of 2019 when we started hearing the same "pop" upon opening. I looked and the same plastic piece on the door is cracked and broken. After contacting Whirlpool and answering many questions they opted not to help with any repair since I had installed the door myself and didn't have a Whirlpool technician replace it. The job is not an intricate or complicated one. So my only option is to spend another $400-500 dollars to have a technician replace the door again and hope I don't have another issue. We've opted to replace with a different manufacturer.

This looks great in my kitchen and works great! We didn't have much space so this worked perfect to get the look of the french doors and freezer on the bottom.

We have had it for about a month, the automatic ice maker is great.

Love the look of this refrigerator. Took it a few days for it to come up to temperature, but it is holding steady now. Only complaint we had was the plastic wrap protecting the finish. It must have been done at the factory. It was underneath the seams around the doors and freezer door. It was very hard to remove and there is blobs of glue inside the door hinges and top of the door that are a little unsightly. But, other than that we are very pleased.